PLA by CREOZONE

  • Posted by: admin

Brand: CREOZONE Well, okay https://jiji.ug/medical-equipment/blood-pressure, let’s move on to practice.
The branded packaging is not flashy, but looks presentable

PLA by CREOZONE

There is a bar from another manufacturer, which has become “popular” in Russia due to its low cost when ordering a large batch and generally good quality, so let’s compare this filament with it, delve a little into the characteristics and test the sintering of the layers, adhesion with table, manufacturing precision and material homogeneity. They promise good uniformity and the absence of impurities, and this reduces the chances of clogging the hot end, uniform sintering and even layers, improving the appearance of the surface of the model.
The coil is also original, there is a sticker with information about the rod. Type: PLA It weathers quickly, does not cause any special problems, but there is. Taking into account the expectation of sending, it took about 10 days, of which 3 days traveled around the local post offices. The filament itself is vacuum-packed, which is guaranteed not to allow moisture to penetrate inside.
Silica gel is not forgotten, although it is not critical for vacuum packaging.
This is a big plus, because. in FD, I confused the plastic several times and had to stop printing. Diameter: 1.75mm Hello everyone! Recently, I was offered to test PLA from Creozone, it was already reviewed by lexus — 08 – showed the appearance, characteristics and several examples of models. Before feeding the bar, I usually get rid of the area that was fixed on the coil and the first thing I noticed is that this filament is more plastic, it breaks worse when bent than its predecessor. Gross weight: 1.21
I will not repeat myself and will go from the other side. Net weight: 1kg After opening the package, there is a slight smell of plastic, and it does not come from the rod, but from the reel. PLA tolerance: ± 0.03mm Print temperatures: PLA: 190°C – 210°C Color:< /b> white They also write that their ABS does not stink, but I will check it maybe next time =) Over time, I learned to determine the material by fragility, but the sticker greatly simplifies life. It is possible that a warm product was packed after drying. Desktop: cold – 60° depending on the surface used. The boxes were wrapped as usual with a black package

Author: admin
X